Driplines with cylindrical emitters, flat emitters, and welded and strip tapes are produced by Adritec in different wall thicknesses ranging from 1.0mm down to 0.1mm, with a wide range of emitter discharge rates and spacing. Pipe diameters range from 12mm to 22.6mm OD, with turbulent flow and pressure compensating no-drain emitters and a discharge rate ranging from 0.65 LPH to 8LPH, to suit the different application requirements and types of crops irrigated. Driplines are mostly used for irrigating row crops, vegetables, potatoes, vineyards, orchards, fruit trees, greenhouses in addition to Maize and several crops that require subsurface irrigation. It is produced using a high quality mix of LDPE and LLDPE plastic material to the highest standards of quality and performance.
1 Adriline
|
The Adriline is a jointless multi seasonal drip pipe with 4 water outlets and a self-cleaning built in strainer at its inlet. It is produced in three different outside diameters, mainly 16mm and 20mm with different wall thicknesses ranging from 0.7mm to 1.0mm. The inline turbulent flow labyrinth type self-cleaning dripper comes with a size of 69mm, with two different discharge rates 2LPH and 4LPH. It is produced at different dripper spacing starting from 20CM.
|
|
|
2 Adripc
The Adripc features a cylindrical pressure compensating self-cleaning emitter with similar mechanical properties as the Adriline. It uses a silicone diaphragm that ensures uniform discharge and water flow uniformity for variable system pressures ranging from 1.0 to 4.0 bars.
The silicon rubber diaphragm initiates a self-flushing cycle that allows cleaning of debris. It is ideal for use in irrigation systems with long lateral length requirements, uneven terrain, mountainous farmland or farms with high slopes. It is applied in both agricultural and landscape irrigation applications.
Adripc is produced in different diameters 16mm, 18mm and 20mm with different pipe wall thicknesses.Emitters are available with two different discharge rates 2 and 4 LPH and at spacing starting from 20cm.
|
|
|
3 Oval Dripline
|
With the success of its flat dripper tape driplines, Adritec Group introduced a new range of driplines using a specially made flat dripper inserted and welded to the inside walls of an oval shaped LDPE tube. The newly developed Oval dripline is produced in 16mm and 20mm OD, with thicknesses of 28mil (0.7mm), 24mil (0.6mm) and 20mil (0.5mm). It withstands working pressures up to 4 bars, and can be installed in longer irrigation driplines compared with the standard cylindrical pipes. It offers major savings in transport cost and the overall cost of an irrigation installation.
|
|
|
4 Miniline
|
The Miniline is a jointless multi-seasonal drip pipe similar to the Adriline in all mechanical properties but for using a 39mm and 33mm turbulent flow cylindrical emitter, with 4 water outlets and a self-cleaning built in strainer at its inlet. It is produced in 16mm and 20mm OD pipes, with emitter discharge rates of 2LPH, 4LPH, 8LPH, and a pipe thickness ranging from 0.9mm down to 0.7mm at an emitter spacing starting from 20cm. It is an economical virgin of the Adriline, applied with the same types of crops as that of the Adriline, but for its low pipe thickness and smaller emitter size which allows it to be used for longer lateral lengths and more economical applications.
|
|
|
5 Adrilite
|
The Adrilite is a light low thickness irrigation pipe with a turbulent flow flat emitter that features a self-cleaning built in strainer at its inlet for efficient water filtration. It is produced with an OD of 17mm and 22.6mm in several thicknesses ranging from 0.15mm up to 0.6mm and is available in many emitter discharge rates of 1.07 LPH, 1.78 LPH, 2.1 LPH, and 3.74 LPH, at a pressure of 0.8 bars. The Adrilite is used for all types of crops including cotton, banana plantations, sugarcane and maize. It can be used for one or multi-season applications depending on the pipe wall thickness. Its low pipe thickness and small sized flat emitter allow it to be used for longer lateral lenghts and more economical applications.
|
|
|
6 Green Tape
|
The Green Tape is an irrigation tape with the emitter labyrinth strip welded to the inside of the extruded tape. It is produced in 17mm and 22.6mm outside diameter and wall thicknesses ranging from 0.15mm up to 0.25mm and a flow of 1.03 LPH at 0.8 bars. Emitter spacing starts from 10cm with 10 cm equal intervals up to 100cm. It can be used for subsurface irrigation applications using 150 mesh filtration.
|
|
|
7 Eco Tape
|
The Eco Tape thin wall dripline features a turbulent flow track emitter that provides a high level of watering uniformity. Each outlet is part of the drip emitter, providing reliable drip flow without squirting. The slit at the outlet reduces insect damage, impedes root intrusion and eliminates plugging from external contaminants at start-up. The water in the supply tube passes into the turbulent channel through multiple filtering inlets. The water next passes through a vortex type turbulent flow channel to regulate the discharge flow before exiting through the outlet. The advanced turbulent flow design uses large passageways which are less likely to clog and provide more uniform discharge for longer lengths of run than most drip tape technologies. The Eco Tape is produced in 4mil, 6 mil, 8 mil and 10 mil thicknesses in 17mm and 22mm Outside Diameter. Eco Tape is mostly recommended for the use of agricultural irrigation, farm irrigation and garden applications.
|
|
|
|